Scrappy Card

 Hello everyone, are we all okay?

Today I have a card that will use some of your scraps.

 

Supplies:

3 different colors of cardstock with the measurements 1 ½” x 4”

Make sure colors are matching, it can be monochromatic or colors that just match.

 

The base for the card: is 4 ¼” x 8 ½” scored at 4 ¼” whatever color that goes with your strips.

 

A two-inch circle for sentiment.

A something that is stamped colored and glued to the circle.

Ribbon bow, if desired.

The inside panel is 4 x 5 then stamped with a sentiment.

ROBIN EGGS IN NEST

Inside of card

Hello, crafty friends I hope you're doing well.  Do you know that Easter is just 19 days away?   It just crept up on us.  You still have time though to make some cards.  This card I made it's not hard to make even if it looks intimidating, I am listing the supplies and measurements I used.  I created this card from Creating with Cheryl Wright.

Cardstock for Base, 5 ½” x 7 ½” Scored at 4 1/4'’ with the 7 ½” side on top.

Also, of same cardstock you’ll need 7” x 3 ½” scored @ 3 ½”

Pattered Paper:  3” x 5 ½”

Pattered Paper: 1 ½” x 5 ½”

White cardstock:  3 ¼ “ x 3 ¼”  &  2 ½” x 5 ½”

Stamp set:  Everyday Details from stamping up or anyone you have that fits in the 3 ¼ x 3 /14”

Ink for stamping Adhesive of choice

Embellishments of choice

First, fold on all the scored sections.  Then glue the piece that measures 7 x 3/12” in the center of the card but on the right side.

Then glue the white strip on the inside center near the fold.

Glue the pattern paper to the front of the card.

Stamp and color your picture and glue it to the half of the piece that is glued inside.  Flip to the front and add embellishment.

I hope you can understand what I am saying.  

Dogwood Flower

inside of card

Hello, my crafty friends.  Hope you’re doing well.

I am bringing you another card featuring the dogwood flower and if you ask me, I think it’s a beautiful one, I hope you agree.

 

For this card, I used the Softly Stippled DSP. 

 

Card Base is 8” x 5 ½” scored @4” and 1 ½”

White cardstock, 2 ¾” x 5 ¼”  

Two pieces 1” x 5 ¼” of DSP that coincide with the cardstock.

2 ½” x 5 ¼” of a different DSP that matches the first DSP and the card base.

 

A piece of white cardstock to stamp your flower on.

 

v First fold the 4” in this will be the inside of the card.

v Second fold the 1 ½” out.

v Glue the strips of 1” x 5 ¼” one goes on the front of the card and the other will go on the inside right.

v Stamp your sentiment in the white piece of cardstock and glue it to the inside of the card.

v Glue the DSP that measures 2 ½” x 5 ¼” to the front left of card.

v Stamp your dogwood flower on a 3 x 4 piece of white cardstock, and color your flower.

v Use the largest rectangle Die that came with the stamp set,  and glue it to the piece on the left of the card in front.

v MAKE SURE YOU JUST GLUE THE PART THAT GOES ON THE CARD.

v VIOLA!

 

Everyday Details

 

Hello my crafty friends, Hope your well.  Today I bring you another card using the everyday details from Stampin’ Up.  Below I list what you need to replicate it.

SUPPLIES:

White card stock 8 ½” by 5 ½” and scored at 4 ¼ “

Cinnamon color card stock 4” by 5 ¼”

A piece of white cardstock for stamping can be a piece of scrap or cardstock.

Everyday Details from stampin’ Up and the dies.

DIRECTIONS:

Ø Take the cinnamon-colored cardstock and die-cut the diamond shape out on the left side.

Ø Stamp the vase on a scrap of white cardstock and color it with the colors of your choice.

.  Cut this one out with a larger rectangle die that comes with the die set.

Ø Glue the cinnamon cardstock to the card base and pop up the vase piece to the middle.  Add sentiments on the outside and the inside of the card and some bling if desired.

 

This card is easy to make and makes a wow statement.

 

Thank you for dropping by, like and share, please.

 

         

 

 

Paper Florist Flower

 

Hello, my crafty friends, I hope you're doing well on this beautiful Sunday!

This is a basic card but I will give you the measurements you need to make it if you so desire.

The card base is 8 1/2" by 5 1/2" and scored on the long side at 4 1/4".

The card mat is 4" x 5 1/4” and I cut it with the radiating stitch die using the dainty DSP.

Die cut some paper florist flowers decorated the exterior of the card, oh also I used a small piece of navy card stock and stuck it in the middle.

Placed a greeting in the center and that's it.  Don't forget to glue the inside piece of cardstock and stamp a sentiment.

 

Cute Mice Visiting

Hello my crafty friends I hope your doing well.

 

These adorable mice holding on to the wall are so cute that I coulnt  resist making a card with them, I don't have the stamp for them but my friend does and she let me borrow it, thank you Katrina.

SUPPLIES USED:

Gray cardstock for Base:  8 1/2 " by 5 1/2" scored @ 4 1/4 "

Ink colors:  Blushing Bride,  So Safron, Balmy Blue, Memento Tuxedo Black

Copic Markers, C3 - RV10

Two pieces of white card stock 4 3/4" by 5 1/4" one is for the inside of the card and the second

one is for the mat  used for the front.

Lawn fawn stamp of the mice

Die for the border

Brick Wall embossing folder

Brush for blending

STEPS TO MAKE CARD:

I first  blended the sky with blushing bride, so safron, balmy blue.  I took the brick wall embossing folder and embossed the bottom of the white mat.  I stamped the mice above it and colored them with the copic markers, I then stamped the sentiments for the top of the card and die cut them out. raised them up with dementionals.

Stamped a sentiment on the other piece of cardstock for the inside and glued it to the inside.

Glued the front mat to the card base and ta da your done.  This card was a lot of fun to make.

Spotlight Technique With Dainty Delights

Hello everyone, I tried my first time making a spotlight technique card which came out pretty good I must say.

     SUPPLIES USED:

Ø     Lilac card stock 

Ø     Medium color of Blue for the card Mat   

Ø     White card stock for stamping and coloring on

Ø     Black ink for stamping

Ø     Dainty Delight Stamp from Stampin” Up

Ø     2 and 3/8s scallop punch

Ø     Blending Brush

Ø     Balmy Blue Ink

Ø     YG06 Yellowish Green for leaves, Copic Marker

Ø     Y02 Canary Yellow, Copic Marker

Ø     Rhinestones for decorating if desired

Ø     Dimensional 

     I started with the Lilac color card base of 8 ½” by 5 ½” I then scored it in half and folded it.

Attached a 3 and ¾” by 4 and ¾” on the Lilas card base and set aside until I finished coloring the flower.

I then colored the flowers with the colors I mentioned above, I punched the center of the flower, then did some brushing with the balmy blue ink very

Lightly so not to cover the flowers too much.

Now place the flower piece on blue card mat and place the circled punch

Inside just for placement, then glue the circle to the blue card mat, add dimensional to the other piece and place on mat,

You are now done except add embellishments if desired.

This card looks a little harder than it really is.

 

Thank you for dropping by, I really appreciated it. 

Please don’t forget to comment and share.  If you want to purchase any of my Cards, e-mail me for information.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EVERYDAY DETAILS

Hello my friends, today I'm bringing you a fold-down card using the everyday details. I haven't been posting any of my cards lately, I'm just getting into the hang of things again.  I'm happy to share the steps with you on this lovely card I made.   The measurements are below.

 

Card Measurements:

The card Base is in Tan colored cardstock measuring 4 1/4" by 5 1/2" 

and scored in the center at 51/2" 

The first Mat is in black cardstock and measures 4 " by 51/4"

One strip of the softly stippled DSP matching color  3 3/4"  by 1 1/2" (I used the blue on with flowers)

A second strip of  softly stippled DSP that coincides with the first color:  3/34" by 1 3/4"

( I used the subtle blue)

one white frame which I  cut out of the everyday details using the largest die.

Feel free to use any of the DSPs that you may have, just because I used this one you don't have to.

oh, the inside of the card I stamped a sentiment and placed two pieces of DSP and flagged it.

I hope you like my card as much as I do.  Thank you for dropping by my blog and if you can share it with your friends, I really would appreciate it.  💖💗💖